Price & Ordering: Faktum Fronts

Traditional Cupboard Doors for Knobs and Handles for IKEA Faktum Kitchens

On this page we list our traditional cupboard doors and fronts for knobs and handles. The “W” models.
The fronts works fine with a Push Open solution or may be retrofitted with knobs or pull-handles. Will be pre-drilled from the factory for hinges and for drawers and just like with fronts from IKEA the drillings for the specific pull handles are always made on site by the end user.
These fronts are for the Faktum kitchen range that was discontinued from the IKEA warehouses back in 2013. Keep the kitchen you already own. Just replace the fronts!
The fronts will be made in the correct size by IKEA´s original drawings and pre drilled by IKEAs templates. They will all fit perfectly out of the box just as if they were picked up from the local IKEA warehouse.
All the fronts on this page are priced by their size, not by the selected colour nor by the model. A shaker door is priced the same as a fully flat door in the same size. The chosen model + colour will show in the cart at £0.
This page may be utilised to price your project. Please just add all the needed sizes of the fronts into a cart and the system will calculate the total cost automatically. At the Checkout page you may finalise your order or save your cart for later.

On this page we list our traditional cupboard doors and fronts for knobs and handles. The “W” models.
The fronts works fine with a Push Open solution or may be retrofitted with knobs or pull-handles. Will be pre-drilled from the factory for hinges and for drawers and just like with fronts from IKEA the drillings for the specific pull handles are always made on site by the end user.
These fronts are for the Faktum kitchen range that was discontinued from the IKEA warehouses back in 2013. Keep the kitchen you already own. Just replace the fronts!
The fronts will be made in the correct size by IKEA´s original drawings and pre drilled by IKEAs templates. They will all fit perfectly out of the box just as if they were picked up from the local IKEA warehouse.
All the fronts on this page are priced by their size, not by the selected colour nor by the model. A shaker door is priced the same as a fully flat door in the same size. The chosen model + colour will show in the cart at £0.
This page may be utilized to price your project. Please just add all the needed sizes of the fronts into a cart and the system will calculate the total cost automatically. At the Checkout page you may finalize your order or save your cart for later.

Step #1: Choose Colour & Profile For The Fronts Here

Please start off the ordering process by selecting your preferred Colour and Pattern combination for your new fronts. The selected colour will apply to all the fronts in the same cart.

[quick_view id=”27200940″ text=”Pattern & Colour Selector”]

Traditional Doors Retrofitted With Pull Handles (Model W30 + Smooth White)

Need some help and support? Get in touch

Please tilt to landscape mode for more info. If possible please use a larger screen (Tablet or Desktop).

Step #2: Add some drawer fronts to your cart

Drawer fronts made in the correct size by the millimeter according to the original IKEA drawings and pre-drilled according to the original IKEA templates. The tables below are sorted by the outer width of the cabinets that house the drawers.

Drawers W=30 cm
Drawers W=40 cm
Drawers W=45 cm
Drawers W=50 cm
Drawers W=60 cm
Drawers W=80 cm
Dishwasher Covers
Drawers W=30 cm

Please use the format Width x Height (not vice versa).

Drawer fronts for 30 cm wide cabinets	Size in mm	VAT Incl.
Drawer Front Faktum 30×13	295×126	£26.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £26.00 Drawer Front Faktum 30×13 quantity
Drawer Front Faktum 30×18	295×182	£28.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £28.00 Drawer Front Faktum 30×18 quantity
Drawer Front Faktum 30×25	295×254	£31.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £31.00 Drawer Front Faktum 30×25 quantity
Drawer Front Faktum 30×31	295×310	£35.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £35.00 Drawer Front Faktum 30×31 quantity
Drawer Front Faktum 30×57	295×566	£73.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £73.00 Drawer Front Faktum 30×57 quantity
Drawer Front Faktum 30×70	295×694	£89.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £89.00 Drawer Front Faktum 30×70 quantity

Drawers W=40 cm

Please use the format Width x Height (not vice versa).

Drawer fronts for 40 cm wide cabinets	Size in mm	VAT Incl.
Drawer Front Faktum 40×13	395×126	£37.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £37.00 Drawer Front Faktum 40×13 quantity
Drawer Front Faktum 40×18	395×182	£43.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £43.00 Drawer Front Faktum 40×18 quantity
Drawer Front Faktum 40×25	395×254	£56.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £56.00 Drawer Front Faktum 40×25 quantity
Drawer Front Faktum 40×31	395×310	£61.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £61.00 Drawer Front Faktum 40×31 quantity
Drawer Front Faktum 40×57	395×566	£83.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £83.00 Drawer Front Faktum 40×57 quantity
Drawer Front Faktum 40×70	395×694	£93.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £93.00 Drawer Front Faktum 40×70 quantity

Drawers W=45 cm

Please use the format Width x Height (not vice versa).

Drawer fronts for 45 cm wide cabinets	Size in mm	VAT Incl.
Drawer Front Faktum 45×13	445×126	£39.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £39.00 Drawer Front Faktum 45×13 quantity
Drawer Front Faktum 45×18	445×182	£44.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £44.00 Drawer Front Faktum 45×18 quantity
Drawer Front Faktum 45×25	445×254	£57.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £57.00 Drawer Front Faktum 45×25 quantity
Drawer Front Faktum 45×31	445×310	£63.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £63.00 Drawer Front Faktum 45×31 quantity
Drawer Front Faktum 45×57	445×566	£86.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £86.00 Drawer Front Faktum 45×57 quantity
Drawer Front Faktum 45×70	445×694	£99.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £99.00 Drawer Front Faktum 45×70 quantity

Drawers W=50 cm

Please use the format Width x Height (not vice versa).

Drawer fronts for 50 cm wide cabinets	Size in mm	VAT Incl.
Drawer Front Faktum 50×13	495×126	£39.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £39.00 Drawer Front Faktum 50×13 quantity
Drawer Front Faktum 50×18	495×182	£44.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £44.00 Drawer Front Faktum 50×18 quantity
Drawer Front Faktum 50×25	495×254	£57.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £57.00 Drawer Front Faktum 50×25 quantity
Drawer Front Faktum 50×31	495×310	£63.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £63.00 Drawer Front Faktum 50×31 quantity
Drawer Front Faktum 50×57	495×566	£86.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £86.00 Drawer Front Faktum 50×57 quantity
Drawer Front Faktum 50×70	495×694	£99.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £99.00 Drawer Front Faktum 50×70 quantity

Drawers W=60 cm

Please use the format Width x Height (not vice versa).

Drawer fronts for 60 cm wide cabinets	Size in mm	VAT Incl.
Drawer Front Faktum 60×9	595×94	£32.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £32.00 Drawer Front Faktum 60×9 quantity
Drawer Front Faktum 60×13	595×126	£39.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £39.00 Drawer Front Faktum 60×13 quantity
Drawer Front Faktum 60×18	595×182	£44.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £44.00 Drawer Front Faktum 60×18 quantity
Drawer Front Faktum 60×25	595×254	£57.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £57.00 Drawer Front Faktum 60×25 quantity
Drawer Front Faktum 60×31	595×310	£63.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £63.00 Drawer Front Faktum 60×31 quantity
Drawer Front Faktum 60×57	595×566	£86.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £86.00 Drawer Front Faktum 60×57 quantity
Drawer Front Faktum 60×70	595×694	£99.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £99.00 Drawer Front Faktum 60×70 quantity

Drawers W=80 cm

Please use the format Width x Height (not vice versa).

Drawer fronts for 80 cm wide cabinets	Size in mm	VAT Incl.
Drawer Front Faktum 80×13	795×126	£59.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £59.00 Drawer Front Faktum 80×13 quantity
Drawer Front Faktum 80×18	795×182	£63.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £63.00 Drawer Front Faktum 80×18 quantity
Drawer Front Faktum 80×25	795×254	£67.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £67.00 Drawer Front Faktum 80×25 quantity
Drawer Front Faktum 80×31	795×310	£73.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £73.00 Drawer Front Faktum 80×31 quantity
Drawer Front Faktum 80×57	795×566	£99.00	This stylish Stay-Lift Arm make your flap or top hinged door stay open in the position where you left it. Normally just one Stay Lift arm per flap is needed. The force is adjustable depending on the weight of the flap. Hinges are sold separately. You may reuse your existing hinges if they are in a good condition. Accessories* 2x Hinges + 2x Mounting plates £29.50 No hinges ordered To make the Stay Lift Arm function properly 2x Hinges + 2x Mounting plates for the hinges are also needed. If you are already in possession of a set of hinges you may reuse them and just order the arm alone. Please tick the box to add a set of hinges. Total: £99.00 Drawer Front Faktum 80×57 quantity

Dishwasher Covers

Dishwasher fronts for integrated dishwashers. The only difference compared to regular doors is that these fronts are not pre-drilled for hinges. This is because the fronts are not fitted onto hinges and empty holes on the back side may otherwise take in moisture and to potentially ruin the front. Please utilise the screws and the fittings that were provided with the dishwasher to fit the front. Please use the format Width x Height (not vice versa).

Fronts for integrated dishwashers	Size in mm	VAT Incl
Dishwasher front 45×57	445×566	£53.00	Options
Dishwasher front 45×70	445×694	£73.00	Options
Dishwasher front 50×70	495×694	£73.00	Options
Dishwasher front 60×57	595×566	£63.00	Options
Dishwasher front 60×70	595×694	£99.00	Options
Washer Front Faktum 60×70	595×694	£99.00	Options

Step #3: Add some doors to your cart

Doors made in the correct size by the millimeter according to the original IKEA drawings and pre-drilled according to the original IKEA templates. The tables below are sorted by the external width of the cabinets.

Doors W 20 cm
Doors W=30 cm
Doors W=40 cm
Doors W=45 cm
Doors W=50 cm
Doors W=60 cm
Top Hinged Doors
Hinges
Doors W 20 cm

Please use the format Width x Height (not vice versa).

DOORS FOR 15-20 CM WIDE CABINETS	Size in mm	VAT Incl.
Door Faktum 15×70	146×694	£63.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £63.00 Door Faktum 15×70 quantity
Door Faktum 20×70	196×694	£69.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £69.00 Door Faktum 20×70 quantity
Door Faktum 20×92	196×918	£73.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £73.00 Door Faktum 20×92 quantity

Doors W=30 cm

Please use the format Width x Height (not vice versa).

DOORS FOR 30 CM WIDE CABINETS	Size in mm	Note	VAT Incl.
Door Faktum 30×57	296×566		£73.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £73.00 Door Faktum 30×57 quantity
Door Faktum 30×70	296×694	This is a regular 30×70 door. Not suitable for a corner cabinet.	£89.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £89.00 Door Faktum 30×70 quantity
Bi-fold Door Faktum 30×70 A	296×694	Bi-fold door for a 90° base corner cabinet. Part A.	£93.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £93.00 Bi-fold Door Faktum 30×70 A quantity
Bi-fold Door Faktum 30×70 B	296×694	Bi-fold door for a 90° base corner cabinet. Part B.	£93.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £93.00 Bi-fold Door Faktum 30×70 B quantity
Door Faktum 30×92	296×918		£99.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £99.00 Door Faktum 30×92 quantity

FOR WALL CORNER CABINETS	Size in mm	Note	VAT Incl.
Door Faktum 32×70	317×694	Door for a 45° corner cabinet.	£93.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £93.00 Door Faktum 32×70 quantity
Door Faktum 32×92	317×918	Door for a 45° corner cabinet.	£99.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £99.00 Door Faktum 32×92 quantity

Doors W=40 cm

Please use the format Width x Height (not vice versa).

DOORS FOR 40 CM WIDE CABINETS	Size in mm	VAT Incl.
Door Faktum 40×35	396×342	£69.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £69.00 Door Faktum 40×35 quantity
Door Faktum 40×57	396×566	£83.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £83.00 Door Faktum 40×57 quantity
Door Faktum 40×70	396×694	£93.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £93.00 Door Faktum 40×70 quantity
Door Faktum 40×92	396×918	£109.00	Front for an integrated washing machine. All washers are different to each other and there are no standards on the hinge positioning that apply to all the washers in the country. The IKEA way was to just provide a standard door and the end user had to make new hinge drillings on site to make the front fit to the specific washer. If we know the exact hinge positioning we will be happy to position the hinge drillings accordingly. This is possible since we produce on order anyway. Please indicate if the door shall be Left hinged, Right hinged or without the hinge drillings by marking the relevant image below: Hinge position * Left hinged Right hinged Undrilled Please stand in front of the door when it is closed. If the hinges are on the left hand side (hidden behind the closed door) the door is left hinged and vice versa. Top hinge position* Please indicate the distance from the TOP of the door and down to the CENTER of the top hinge in millimeters. Standard IKEA doors = 59 mm. Bottom hinge position* Please indicate the distance from the BOTTOM of the door and up to the CENTER of the lower hinge in millimeters. Standard IKEA doors = 59 mm. We will leave the front undrilled for the hinges. This is a good choice if you will leave the measuring to your joiner or if you haven’t bought your next washer yet. Important * Must be left open when the machine is operating. If the door is not left open while the machine is operating, excess heat may be trapped inside which sooner or later potentially may cause visual defects to the door. Please tick the box to accept. Total: £109.00 Door Faktum 40×92 quantity

FOR TALL CABS. WIDTH 40 CM	Size in mm	VAT Incl	Options
Front Faktum 40×125	395×1245	£163.00	Options
Door Faktum 40×195	396×1942	£239.00	Options

Doors W=45 cm

Please use the format Width x Height (not vice versa).

DOORS FOR 45 CM WIDE CABINETS	Size in mm	VAT Incl.
Door Faktum 45×70	446×694	£99.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £99.00 Door Faktum 45×70 quantity
Door Faktum 45×92	446×918	£107.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £107.00 Door Faktum 45×92 quantity

Doors W=50 cm

Please use the format Width x Height (not vice versa).

DOORS FOR 50 CM WIDE CABINETS	Size in mm	VAT Incl
Door Faktum 50×57	496×566	£86.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £86.00 Door Faktum 50×57 quantity
Door Faktum 50×70	496×694	£99.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £99.00 Door Faktum 50×70 quantity
Door Faktum 50×92	496×918	£119.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £119.00 Door Faktum 50×92 quantity

DOORS FOR 50 CM WIDE TALL CABINETS	Size in mm	Price
Front Faktum 50×125	495×1245	£169.00	Options
Door Faktum 50×195	496×1942	£249.00	Options

Doors W=60 cm

Please use the format Width x Height (not vice versa).

DOORS FOR 60 CM WIDE CABINETS	Size in mm	VAT Incl.
Door Faktum 60×35	596×342	£63.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £63.00 Door Faktum 60×35 quantity
Door Faktum 60×57	596×566	£86.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £86.00 Door Faktum 60×57 quantity
Door Faktum 60×70	596×694	£99.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £99.00 Door Faktum 60×70 quantity
Door Faktum 60×92	596×918	£119.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £119.00 Door Faktum 60×92 quantity

FOR TALL CABS. WIDTH 60 CM	Size in mm	VAT Incl
Door Faktum 60×90	596x900	£119.00	Options
Front Faktum 60×125	595×1245	£169.00	Options
Door Faktum 60×195	596×1942	£249.00	Options

Top Hinged Doors

The fronts listed at this tab are top hinged. I.e. the hinges are positioned at the top part and the flaps are opened up towards the ceiling. Not opened sideways as with regular doors. The flaps are most often positioned in horizontal wall cabinets or at the top part of a tall cabinet.

Please use the format Width x Height (not vice versa). The drillings for the hinges will be positioned along the FIRST figure (the width)

TOP HINGED DOORS	Size in mm	VAT Incl.
Top Hinged Faktum Door 60×35	596×342	£63.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £63.00 Top Hinged Faktum Door 60×35 quantity
Top Hinged Faktum Door 70×30	694×296	£85.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £85.00 Top Hinged Faktum Door 70×30 quantity
Top Hinged Faktum Door 70×40	694×396	£93.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £93.00 Top Hinged Faktum Door 70×40 quantity
Top Hinged Faktum Door 92×30	918×296	£93.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £93.00 Top Hinged Faktum Door 92×30 quantity
Top Hinged Faktum Door 92×40	918×396	£99.00	Please select whether the door shall be left or right hinged. The reason we ask is because there are 3 hinges connecting this door to the cabinet and the middle hinge is not positioned exactly in the center. If we know “left/ right” we also know exactly where to position the middle hinge drilling. The difference is just cosmetic. Please mark one of the images. Stand in front of the door when it is closed. If the hinges are positioned on the left hand side (hidden at the back of the door), the door is left-hinged and vice versa. Drillings * Left hinged Right hinged Undrilled – No hinge drillings Not sure whether the door will be utilised as left or right? Don’t worry. The only noticeable difference will be if a left hinged and a right hinged door are fitted side by side and when both doors are opened at the same time. Then some may argue the middle hinges are not aligned in the exact same height. The visual difference will be 32 mm counted from the bottom of the cabinet. So, really not a big difference but a very few customers have argued about this over the years. If one door is ordered as a left door and the other as a right door, the middle hinges will be positioned at the exact same height. By selecting this choice we will leave the back of the front without any holes at all. This is the perfect choice if you will utilise this front as a drawer front and would like to make your own drillings. Thereby there will be no pre-drilled holes that will interfere. Please see this short article on how to make yourself a copy of the old drillings with ease. Total: £99.00 Top Hinged Faktum Door 92×40 quantity

HINGES FOR TOP HINGED DOORS	VAT Incl
Stay-Lift Arm for Flaps/ Top Hinged Doors	£53.00	Options

In practice we are able to make ANY of our doors as top hinged. Please let us know and we will be happy to position the hinges at the top part of any door. A service we are happy to provide at no extra charge.

Hinges

Regular hinges for Faktum	Price	More info
Hinge for Faktum – SoftClose + SelfClose	£12.95	Options
Hinges for Faktum – SoftClose + SelfClose, Multipack	Original price was: £12.95.Current price is: £9.90.	Options
Mounting plate for the hinges	£5.00	Options

Special purpose hinges for Faktum	Price	More info
Faktum hinge with an extra wide opening angle of 155°	£29.00	Options
Hinge for a Faktum Wall Corner Cabinet fitted in a 45° angle	£25.00	Options
Connecting Bi-fold Door Hinge for a 90° Corner Cabinet	£25.00	Options
Stay-Lift Arm for Flaps/ Top Hinged Doors	£53.00	Options

Please note: If your current hinges are fine there is no technical reason to replace them. Our new doors will have a perfect fit to your current hinges. If you however are after the modern and luxurious SoftClose + SelfClose Technology we suggest you go with the new hinges at the same time as you replace the doors anyway.

Left Hinged Right Hinged IKEA Kitchen Doors

Why we do not ask Left or Right

Will the fronts be pre-drilled?

Glass Panel Doors

Step #4: Panels, plinths and other custom-made parts for your IKEA Faktum kitchen

In contrast to IKEA, who only offered fixed sizes of large panels we manufacture Panels and Plinths etc by the millimeter according to YOUR measurements. This is possible since we produce on order anyway. No cutting on site needed and no rough edges without the colour that might be fairly visible.

End Panel for IKEA Faktum kitchens

[quick_view id=”27195973″ text=”SIDE PANELS”]

Filler Panel for an IKEA Faktum kitchen

[quick_view id=”27196011″ text=”FILLER PANELS”]

Pelmet for an IKEA Faktum kitchen

[quick_view id=”27196014″ text=”PELMETS”]

Plinth Kickboard for IKEA Faktum kitchens

[quick_view id=”27196020″ text=”PLINTHS”]

Step #5: New Cabinets and Cupboards for IKEA Faktum Kitchens

Add some new Faktum cabinets and cupboards to your existing kitchen. This will link you to the Faktum Cabinetry Section of our site. From there you will be able to continue to add more items to your cart such as cupboards, shelves and drawers etc.

To the Cabinets section

Drawers for IKEA FAktum and IKEA Rationell kitchens
IKEA Faktum Kitchen Base Cabinet

Step #6: New Doors And Fronts For The IKEA Metod Range

Yes, we also offer our premium doors and fronts for the Metod kitchen system currently sold by IKEA today. Perhaps you would like to mix some new Metod doors into your existing Faktum kitchen? Please just continue and add Metod sized doors and fronts into your cart. Will be made in the same pattern + colour combination as the Faktum doors in the same cart.

To the Metod range section

Free colour samples for IKEA Faktum kitchen upgrades

Request a kit of our free colour swatches

Need some help and support? Get in touch

Price & Order – New doors and fronts for IKEA Faktum kitchens

Price & Ordering: Faktum Fronts

Traditional Cupboard Doors for Knobs and Handles for IKEA Faktum Kitchens

Step #1: Choose Colour & Profile For The Fronts Here

Step #2: Add some drawer fronts to your cart

Step #3: Add some doors to your cart

Step #4: Panels, plinths and other custom-made parts for your IKEA Faktum kitchen

Step #5: New Cabinets and Cupboards for IKEA Faktum Kitchens

Step #6: New Doors And Fronts For The IKEA Metod Range

Your basket (items: 0)